4-15
4. Troubleshooting
Replacing the Panel
When replacing the panel: After replacing the panel, select the Panel Ch. No. item and press and hold the MENU key
for 5 seconds.
The Panel Ch. No. increases by 1 and the Panel On Time is reset to 0.
At the same time, the Panel Cycle is also reset to 0.
Other Functions
1. Auto Auto : On / Off
2. PixelShift : On / Off
3. Country : English / Korean / Chinese / Japanese
4. HDCP HP-DVI : On / Off
5. HDCP HP-HDMI : On / Off
6. HotPlug Time : 5~50 (Default 9 : 0.9sec)
To Next Page
Loading...
