EasyManua.ls Logo

Samsung 590 Series - USB Cloning Procedures; Cloning to USB and from USB

Samsung 590 Series
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
English
¦ USB Cloning
USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup)
from one TV set and upload the same to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
y Cloning from TV to USB: It is an operation to copy the stored data from the specific area on
the EEPROM from the TV set to the USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing this buttons in order.
x
MUTE 1 1 9 ENTER
3. Press the or button to select “Clone:TV to USB”, then press the ENTER button.
4. The message “Clone:TV to USB” is displayed, then press the ENTER button.
5. You can Make sure USB cloning behavior.
x
In Progress: during copying data to USB.
x
Completed: copy operation was finished successfully.
x
Failed: copy operation was not finished successfully.
x
No USB: any USB is not connected.
y Cloning from USB to TV: It is an operation to download the stored data in USB device to
TV set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing this buttons in order. MUTE 1 1 9
ENTER
3. Press the or button to select “Clone:USB to TV”, then press the ENTER button.
4. The message “Clone:USB to TV” is displayed, then press the ENTER button.
5. You can Make sure USB cloning behavior.
x
In Progress: during copying data to TV.
x
Completed: copy operation was finished successfully.
x
Failed: copy operation was not finished successfully.
x
No USB: any USB is not connected.
x
No File: there is no file to copy in USB.
The operation to copy from USB to TV can be executed by pressing ENTER key for 5 seconds.
The Hotel TV product family does not support the CLONE function between a model that supports the satellite / T2
operation and a model that does not.
For fast instant cloning during installation!
Insert USB key with master settings from first TV and press Enter key for 5 seconds.
Logo/Message
Cloning
d
Clone TV to USB
Clone Clone USB to TV
Setting Auto Initialize
OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone Clone USB to TV
Setting Auto Initialize
OFF
[Hotel-590_690_790]BN68-04282R-Eng.indd 25 2012-07-26 오후 2:46:50

Related product manuals