5
English
Installing the LED TV Stand
The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or
90 degrees left and right.
Stand Components
When installing the stand, use the provided components and parts.
y S
tand (Stand shape is depending on the model)
-790 : 4-Leg, Other : Square-
y Guide Stand y Screws y Bolt + Nut
(32" 590, 690 Model only)
C
x8 (M4 X L12)
590, 690, 790 model
(Except 55" 790 model)
D
55" 790 Model only
x8 (M4 X L10)
4
✎
Place a soft cloth over the table to protect the TV, and then
place the TV on the cloth screen side down.
✎
Insert the Stand Guide into the slot of TV bottom side.
1 2
B
A
Rear
Front
(Incorrect assembly)
Side View
3
(Correct assembly)
Top View
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
ATTENTION
C
x4 (M4 X L12) 590, 690, 790 model
(Except 55" 790 model)
D
x4 (M4 X L10) 55" 790 Model only
or
C
x4 (M4 X L12) 590, 690, 790 model
(Except 55" 790 model)
D
x4 (M4 X L10) 55" 790 Model only
or
or
A
1 EA
B
1 EA
E
32" 590, 690 Model only
]
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with the
installation instruction.
✎
Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them.
✎
Make sure that at least two people lift and move the TV.
Top
Bottom
[Hotel-590_690_790]BN68-04282R-Eng.indd 5 2012-07-26 오후 2:46:45
To Next Page
Loading...
