◀ ▶
English
To set Standby Mode Upgrade, follow these steps:
1. Press the arrow buttons to select Upgrade in Standby Mode, and then press
the ENTER
button.
2. Select On or Off.
●
Off: If you select Off, the TV will notify you with a pop up message when
new upgrade software is available.
●
On: If you select On, the TV will automatically download new upgrade
software when it is in Standby mode with the power off. If it downloads new
upgrade software, the TV will ask you if you want to install it when you turn
the TV on.
N
To use the Standby Mode Upgrade function, your TV must be connected to
the Internet.
To Next Page
Loading...
