◀ ▶
English
◀
Using the ARC function
You can listen to sound through a receiver connected using an HDMI cable without
connecting a separate optical cable.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
N
To use the ARC function, a receiver which supports the HDMI-CEC and ARC
features must be connected to the HDMI IN 2 (ARC) port.
N
To disable the ARC function, set the Receiver to Off. Even if the TV transmits
the ARC signal continuously, the receiver will be blocked from receiving the
signal.
To Next Page
Loading...
