▶ ◀ ▶
English
The functions in the Edit Mode Menu bar are described below.
N
NOTE
●
Some menu items may not appear on the screen. To see these items, press
the
/
to move to the screen edge, and then press one more time to
reveal the items.
●
You can close the bar by highlighting the X on the bottom right side, and
then pressing the ENTER
button.
●
Change Position
The Change Position function lets you change the screen position of an
application. To use the Change Position function, follow these steps:
1. Press the
button on your remote.
2. Select an application, and then press the ENTER
button. A
appears
above the application.
To Next Page
Loading...
