▶ ◀ ▶
English
●
However, you can connect only one Anynet+ Home Theater. To connect an
Anynet+ Home Theate, connect the Home Theater to the TV using an HDMI cable
then:
–
To hear sound from the Home Theater’s Front, Left and Right speakers and the
subwoofer only, connect a Digital Optical cable between the DIGITAL AUDIO
OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home
Theater.
–
To hear 5.1 channel audio, connect HDMI cables to your Anynet+ DVD player,
satellite box, etc. Then, connect the DIGITAL AUDIO OUT (OPTICAL) jack on
your DVD player, Satellite Box, etc. (i.e. Anynet + Device 1 or 2) directly to the
Home Theater, not the TV.
To Next Page
Loading...
