Samsung AC BNZDCH Series - Page 42

42
English
Installation Procedure
Installation
Steps Remote control display
5. Set the SEG6 and SEG8 values:
a. Set the SEG6 value by pressing the
(Low Fan) button repeatedly until the value
you want to set appears on the remote control display.
SEG6
b. Set the SEG8 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the
(Low Fan) or (High Fan) button, values appear in the
following order:
SEG8
6. Press the (Mode) button. Fan and On appear on the remote control display.
7. Set the SEG9 and SEG10 values:
a. Set the SEG9 value by pressing the
(Low Fan) button repeatedly until the value
you want to set appears on the remote control display.
SEG9
b. Set the SEG10 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the
(Low Fan) or (High Fan) button, values appear in the
following order:
SEG10
8. Press the (Mode) button. Heat and On appear on the remote control display.
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 42 2022-09-15 오전 9:53:26