Samsung AC BNZDCH Series - Page 50

50
English
Installation Procedure
Installation
 If you are using on or off controller, set RMC address.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Function Page Mode Setting main address
Reserved
Indoor unit number Indoor unit number
Indication
and
details
Indication Details Indication Details Indication Details Indication Details Indication Details
0 A
0
No main
address
0 to 1
Tens
digit
0 to 9
Units
digit
1
Main
address
setting
mode
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Function Page
Reserved
Setting RMC address
Reserved
Group channel
(x16)
Group address
Indication
and
details
Indication Details Indication Details Indication Details Indication Details
1
0
No RMC
address
RMC1 0 to 2 RMC2 0 to F
1
RMC
address
setting
mode
CAUTION
 The main address must be set to a value in the range 0 to 15. If you set other values, communication
error will occur.
 If any of SEG5 and SEG6 is set to a value in the range A to F, the main address of the indoor unit does
not change.
 If SEG3 is set to 0, the indoor unit maintains the existing main address even if SEG6 is set to a new
value.
 If SEG9 is set 0, the indoor unit maintains the existing RMC address even if SEG11 and SEG12 are set to
new values.
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 50 2022-09-15 오전 9:53:33