What to do if my Samsung AC MN DKH shows error E202?
If your Samsung Air Conditioner displays error code E202, the suggested solution is to check the electrical connection and settings between the indoor and outdoor units.
What to do if my Samsung AC MN DKH Air Conditioner displays error code E121?
If your Samsung Air Conditioner shows error code E121, it indicates an issue with the indoor unit's room thermistor, specifically an open or short circuit. Check the room temperature sensor of the indoor unit for shorts or opens.
What to do if Samsung AC MN DKH Air Conditioner displays error E154?
If your Samsung Air Conditioner displays error code E154, check the indoor fan operation of the indoor unit.
Why does my Samsung AC MN DKH Air Conditioner show error E201?
Error code E201 on your Samsung Air Conditioner indicates a communication tracking failure after the initial power supply, regardless of the number of units. To resolve this, check the indoor quantity setting in the outdoor unit.
What does error code E122 mean on a Samsung AC MN DKH?
Error code E122 on your Samsung Air Conditioner indicates an issue with the indoor unit's EVA_IN thermistor, specifically an open or short circuit. Check the EVA IN sensor of the indoor unit for shorts or opens.
What should I do if my Samsung AC MN DKH shows error E123?
If your Samsung Air Conditioner displays error code E123, it means there is an issue with the indoor unit's EVA_OUT thermistor, likely an open or short circuit. Check the EVA OUT sensor of the indoor unit for shorts or opens.
What to do if my Samsung AC MN DKH Air Conditioner is showing error code E203?
If your Samsung Air Conditioner displays error code E203, check the electrical connection and setting between the indoor unit MAIN PBA and the INVERTER PBA.
How to fix error E231 on Samsung AC MN DKH?
To address error code E231 on your Samsung Air Conditioner, check the Cond-Out sensor for an open or short circuit.
What causes error E153 on a Samsung AC MN DKH Air Conditioner?
Error code E153 on your Samsung Air Conditioner indicates an issue with the indoor unit's float switch, possibly an open or short circuit related to drain pump operation. Check the float switch (2nd detection).
General| Series | MN DKH Series |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Noise Level (Indoor) | 19 dB to 42 dB |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -15°C to 24°C |
To Next Page