23
Installation Procedure
English
2 Set the option values.
CAUTION
ŷ The total number of available options are 24: SEG1 to
SEG24.
ŷ Because SEG1, SEG7, SEG13, and SEG19 are the page
options used by the previous remote control models,
the modes to set values for these options are skipped
automatically.
ŷ Set a 2-digit value for each option pair in the
following order: SEG2 and SEG3 ĺ SEG4 and SEG5
ĺ SEG6 and SEG8 ĺ SEG9 and SEG10 ĺ SEG11 and
SEG12 ĺ SEG14 and SEG15 ĺ SEG16 and SEG17 ĺ
SEG18 and SEG20 ĺ SEG21 and SEG22 ĺ SEG23 and
SEG24
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0XXXXX
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1XXXXX
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2XXXXX
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3XXXXX
On (SEG1 to SEG12) Off (SEG13 to SEG24)
Take the steps presented in the following table:
Steps Remote control display
1 Set the SEG2 and SEG3 values:
a Set the SEG2 value by pressing the
(Low Fan) button repeatedly until the
value you want to set appears on the remote control display.
SEG2
b Set the SEG3 value by pressing the (High Fan) button repeatedly until the
value you want to set appears on the remote control display.
When you press the
(Low Fan) or (High Fan) button, values appear in the
following order:
SEG3
2 Press the (Mode) button. Cool and On appear on the remote control display.
To Next Page
Loading...
