Samsung AC RNCDKG Series - Page 19

19English
Installation Procedure
Option setting Status
4 Setting Dry mode
Press Mode button to be changed to DRY mode in the ON status.
5 Setting SEG6, SEG8 option
Press Low Fan button to enter SEG6 value.
Press High Fan button to enter SEG8 value.
Each time you press the button, will be selected in
rotation.
SEG6 SEG8
6 Setting Fan mode
Press Mode button to be changed to FAN mode in the ON status.
7 Setting SEG9, SEG10 option
Press Low Fan button to enter SEG9 value.
Press High Fan button to enter SEG10 value.
Each time you press the button, will be selected in
rotation.
SEG9 SEG10
8 Setting Heat mode
Press Mode button to be changed to HEAT mode in the ON status.
9 Setting SEG11, SEG12 option
Press Low Fan button to enter SEG11 value.
Press High Fan button to enter SEG12 value.
Each time you press the button, will be selected in
rotation.
SEG11 SEG12
10 Setting Auto mode
Press Mode button to be changed to AUTO mode in the OFF status.
11 Setting SEG14, SEG15 option
Press Low Fan button to enter SEG14 value.
Press High Fan button to enter SEG15 value.
Each time you press the button, will be selected in
rotation.
SEG14 SEG15