Samsung AC RNCDKG Series - Page 24

24
Installation Procedure
English
Installation Procedure
Setting an indoor unit installation option (suitable for the condition of each installation location)
1 Make sure that the power is supplied to the indoor unit. If the indoor unit is not plugged in, it must include a power
supply.
2 The panel(display ) should be connected to an indoor unit to receive option.
3 Set the installation option according to the installation condition of an air conditioner.
• The default setting of an indoor unit installation option is “02000-100000-200000-300000”.
• Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when
there is more than one indoor unit.
• No need to assign SEG3, 6, 8, 9, 10, 11, 14, 22, 23, 24 which are non applicable. Even though those segments
are set, they will be ignored.
• If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
4 Set the indoor unit option by wireless remote controller.
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
RESERVED
Use of external
temperature
sensor
Use of central
control
RESERVED
Indication
and Details
Indication Details Indication Details Indication Details Indication Details
0 2
0 Disuse 0 Disuse
1 Use 1 Use
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE
RESERVED RESERVED RESERVED RESERVED RESERVED
Indication
and Details
Indication Details
1
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAGE Use of external control
Setting the output
of external control
RESERVED
Buzzer control
Number of hours
using filter
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details
2
0 Disuse
Slave,
Existing
Control
0
Thermo
on
0
Use of
buzzer
2
1000
Hour
1 On/Off
2 Off
3 Window
4 Disuse
Master,
Existing
Control
5 On/Off
6 Off
7 Window
8 Disuse
Slave,
Reverse
Control
1
Operation
on
1
Non
use of
buzzer
6
2000
Hour
9 On/Off
A Off
B Window
C Disuse
Master,
Reverse
Control
D On/Off
E Off
F Window