Samsung AC RNCDKG Series - Page 26

26
Installation Procedure
English
Installation Procedure
Example: When installing DPM (1 Outdoor unit with 4 indoor units)
Condition SEG14 Setting
Result
External control Level control Indoor 1 Indoor 2 Indoor 3 Indoor 4
Default Not set (0) Slave (All)
Disuse Use 4 Not set (0) Not set (0) Not set (0)
Master (Indoor 1), Slave
(Indoor 2,3,4)
Use (Indoor 3) Disuse Not set (0) Not set (0) 1~3 Not set (0) Slave (All)
Use (Indoor 4) Use Not set (0) Not set (0) Not set (0) 5~7
Master (Indoor 4), Slave
(Indoor 1,2,3)
Changing a particular option
You can change each digit of set option.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode
you want to
change
The tens’ digit of
an option SEG you
will change
The unit digit of
an option SEG you
will change
The changed value
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 D
Option
mode
0~F
Tens’ digit
of SEG
0~9
Unit digit
of SEG
0~9
The
changed
value
0~F
NOTE
• When changing a digit of an indoor unit address setting option, set the SEG3 as ‘A’.
• When changing a digit of indoor unit installation option, set the SEG3 as ‘2’.
Ex) When setting the 'buzzer control' into disuse status.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode
you want to
change
The tens’ digit of
an option SEG you
will change
The unit digit of
an option SEG you
will change
The changed value
Indication 0 D 2 1 7 1