Samsung AC TNXDKG Series - Remote Control Operation; Operation Modes; Temperature Control; Fan Speed Control

18
Indoor Unit Installation
English
Installation
Option setting Status
15 Setting SEG18, SEG20 option
a Press Low Fan button
to enter SEG18 value.
b Press High Fan button
to enter SEG20 value.
Each time you press the button,
will be selected in rotation.
SEG18 SEG20
16 Setting Fan mode
Press Mode button to be changed to Fan mode in the OFF status.
17 Setting SEG21, SEG22 option
a Press Low Fan button
to enter SEG21 value.
b Press High Fan button
to enter SEG22 value.
Each time you press the button,
will be selected in rotation.
SEG21 SEG22
18 Setting Heat mode
Press Mode button to be changed to Heat mode in the OFF status.
19 Setting SEG23, SEG24 option
a Press Low Fan button
to enter SEG23 value.
b Press High Fan button
to enter SEG24 value.
Each time you press the button,
will be selected in rotation.
SEG23 SEG24
3 Check whether the option values that you have set are correct by pressing the
button repeatedly.
[SEG2, SEG3]
[SEG21, SEG22] [SEG23, SEG24]
[SEG4, SEG5] [SEG6, SEG8] [SEG9, SEG10] [SEG11, SEG12] [SEG14, SEG15] [SEG16, SEG17] [SEG18, SEG20]
4 Save the option values into the indoor unit:
Press the
button with the direction of remote control for set. For correcting option values, input the option values twice.
5 Check whether the air conditioner operates in accordance with the option values you have set:
a Reset the indoor unit by pressing the Reset button on the indoor or outdoor unit.
b Remove the batteries from the remote control, insert them again, and then press the
button on the remote control.
DB68-08947A-00_IM_CAC QMD_EU_EN_.indd 18 2020-02-10 오전 11:14:32