22
Indoor Unit Installation
Installation
Example) If you want to set as "MAIN: 3, CHANNEL: 1, RMC: B",
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 A 1 - - 3
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 - 1 - 1 B
Assign option codes except SEG 1, 7 which are page options.
Setting the installation options in a batch
1 Make sure that the power is supplied to the indoor unit. If the indoor unit is not plugged in, it must include a power supply.
2 The panel(display ) should be connected to an indoor unit to receive option.
3 Set the installation option according to the installation condition of an air conditioner.
‐ The default setting of an indoor unit installation option is “02000-100000-200000-300000”.
‐ Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when there
is more than one indoor unit.
‐ No need to assign SEG3, 6, 9, 10, 11, 16, 21, 22, 23, 24 which are non applicable. Even though those segments are set,
they will be ignored.
‐ If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
4 Set the indoor unit option by wireless remote controller.
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE Auto cleaning
Use of external
temperature
sensor
Use of central
control
RESERVED
Indication
and details
Indication Details Indication Details Indication Details Indication Details Indication Details
0 2
0
Indoor drying
disuse
Auto cleaning
disuse
0 Disuse 0 Disuse
2
Indoor drying
5min
1 Use 1 Use
4
Indoor drying
10min
6
Indoor drying
30min
8
Indoor drying
disuse
Auto cleaning
use
DB68-08947A-00_IM_CAC QMD_EU_EN_.indd 22 2020-02-10 오전 11:14:33
To Next Page
Loading...
