To Next PageTo Next PageWhat to do if my Samsung AC018MNADCH/AA Air Conditioner shows compressor overload prevention?
If your Samsung Air Conditioner shows compressor overload prevention, contact an Authorized Service Center.
What to do if my Samsung Air Conditioner detects blockage on high pressure pipe?
If your Samsung Air Conditioner detects a blockage on the high-pressure pipe, contact an Authorized Service Center.
Why is my Samsung AC018MNADCH/AA cooling operation restricted?
If the cooling operation of your Samsung Air Conditioner is restricted at an outdoor temperature below Tcool_low value (default: 0 °C), adjust the outdoor temperature settings.
What to do if my Samsung AC018MNADCH/AA Air Conditioner is not installed smart?
If Smart Install is not installed, install Smart Install.
What to do if my Samsung Air Conditioner shows error due to abnormal rotation of the compressor?
If your Samsung Air Conditioner shows an error due to abnormal rotation or unconnected wire of the compressor, contact an Authorized Service Center.
What to do if my Samsung Air Conditioner has a communication error between indoor and outdoor units?
If your Samsung Air Conditioner shows a communication error between the indoor and outdoor units (pre-tracking failure or a mismatch in the number of indoor units), contact an Authorized Service Center.
What to do if my Samsung Air Conditioner displays an indoor fan error?
If your Samsung Air Conditioner is showing an indoor fan error, contact an Authorized Service Center.
What to do if my Samsung AC018MNADCH/AA system stops due to full current control?
If your Samsung Air Conditioner system stops because of full current control, contact an Authorized Service Center.
What to do if my Samsung AC018MNADCH/AA Air Conditioner system stops due to overload protection control?
If your Samsung Air Conditioner system stops due to overload protection control, contact an Authorized Service Center.
What to do if my Samsung AC018MNADCH/AA shows communication error between indoor unit and outdoor unit?
If there is a communication error between the indoor and outdoor units, especially if there's no response from the indoor units after tracking, contact an Authorized Service Center.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 18000 BTU/h |
| Outdoor Unit Dimensions (WxHxD) | 780 x 540 x 290 mm |
| Indoor Unit Weight | 9.5 kg |
| Outdoor Unit Weight | 32 kg |
Essential safety guidelines for servicing air conditioners, emphasizing proper part usage and handling.
Safety measures to prevent damage from static electricity and protect against potential hazards during service.
Key safety instructions for handling product power, cables, and user interaction to prevent shock or fire.
Detailed technical specifications including dimensions, capacity, power consumption, and noise levels for various models.
Overview of error codes and corresponding LED display indicators for diagnosing system faults.
A comprehensive list of error codes and troubleshooting steps specifically for outdoor unit malfunctions.
Diagnostic flowcharts and procedures for addressing common indoor unit operational symptoms and failures.
Troubleshooting steps for diagnosing and resolving indoor fan errors, including connector checks and foreign substance removal.
Diagnostic guide for communication errors between indoor and outdoor units, involving cable checks and signal measurements.
Steps to troubleshoot indoor unit float sensor failures, including resistance checks and drain pump operation.
Procedure for diagnosing and resolving EEPROM circuit failures, involving component checks and PCB replacement.
Initial diagnostic steps for troubleshooting outdoor units that are not receiving power, checking voltage and connections.
Troubleshooting guide for communication errors, focusing on cable connections and PBA replacement.
Diagnostic steps for outdoor temperature sensor errors, including resistance checks and voltage measurements.
