51
Installation
Setting the installation options in a batch
Option No. for an indoor unit address: 02XXXX-1XXXXX-2XXXXX-3XXXXX
1 Make sure that the power is supplied to the indoor unit. If the
indoor unit is not plugged in, it must include a power supply.
F4F3
1(L) 2(N)
F1 F2 V1 V2
2 Set the installation options of indoor units, by referring to the following table and by following the steps in "Common steps for
setting the addresses and options" on page 40.
The installation options of indoor units are set to 020010-100000-200000-300000 by default.
The SEG20 option, Individual control with remote control, allows you to control multiple indoor units individually by
using the remote control.
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 51 2022-09-15 오전 9:53:33
To Next Page
Loading...
