Samsung AC024JXADCH - Installing the Wind Baffle

37
ENGLISH
Installing the wind bae
If you operate the cooling operation of air conditioner in the condition where ambient temperature is lower than 23 °F
DB(Dry bulb), or the outdoor unit might be faced with strong wind directly, the wind bae should be installed to prevent the
outdoor unit fan from operating in reverse way.
❋ Wind bae is not supplied with the product.
Make holes on both sides and attach the
wind bae using screws.
Make holes on both sides and attach the
wind bae using screws.
24.6 inch
0.63 inch
Partition
<Front View>
"A"
"A"
<Top Down View>
“A” – Should be 7 7/8 inch or longer
• When attaching the wind bae using screws, be careful that the screws do not damage the partition and the
heat exchanger.
CAUTION
• Install outdoor units with the back surface facing wall side to eliminate the eects of external wind.
NOTE