Samsung AC026KNADEH - Setting the On;Off Timer; Setting the On Timer

19English
Power Smart Features
Power Smart Features
Setting the On/Off timer
You can set the air conditioner to be turned on or off automatically at desired time.
Setting the On timer
When the air conditioner is turned off.
1. Press the Timer button to select (On).
- (On) indicator will keep blinking and you can set the time.
2. Press the < or > button to set the time.
- You can set the time in half hour unit from 30minutes (0.5 on
the display) ~ 3hours and hour unit from 3 ~ 24hours.
- Time can be set from minimum 30 minutes to maximum
24hours.
3. Press the SET button to complete the On timer setting.
- (On) indicator and the set time of the timer will be displayed
on the remote controller display.
- On timer setting will be cancelled if you don't press the SET
button within 10seconds after setting the time. Therefore,
check for the (On) indicator on the remote controller display.
Cancel
 Press the Timer button  select (On)  press the <
or > button  set the timer to  press the SET
button.
Additional options available in On timer
Select the mode from (Auto)  (Cool)  (Dry)  (Fan) and  (Heat).
❇ Heat mode operates with MR-EH00/MR-EH00U model only.
You can adjust the temperature after timer setting is completed.
Temperature adjustment is only available in Auto/Cool/Dry/Heat mode. In Fan mode,
temperature cannot be adjusted.
❇ Heat mode operates with MR-EH00/MR-EH00U model only.
• When On timer setting is completed, the set status will be displayed for 3 seconds, and
then only (On) indicator will remain on the remote controller display thereafter.
NOTE
Remote controller display