What does E221 error mean on a Samsung AC035TNXDKG?
If your Samsung Air Conditioner displays error E221, it indicates an error with the outdoor temperature sensor, specifically a short or open circuit.
What does E450 error mean on a Samsung AC035TNXDKG Air Conditioner?
If your Samsung Air Conditioner shows error code E450, it indicates an abnormally high temperature on the Cond, detected for the second time.
What does E554 error mean on a Samsung AC035TNXDKG?
If your Samsung Air Conditioner displays error E554, it indicates refrigerant leakage, detected for the second time.
What does E416 error mean on a Samsung AC035TNXDKG Air Conditioner?
If your Samsung Air Conditioner displays error E416, it indicates an abnormally high temperature on the discharged air of the outdoor unit, detected for the second time.
What does E451 error mean on a Samsung AC035TNXDKG Air Conditioner?
If your Samsung Air Conditioner displays error E451, it indicates a low pressure s/w, detected for the second time.
What does E403 error mean on a Samsung AC035TNXDKG?
If your Samsung Air Conditioner displays error E403, it means the compressor stopped due to freeze detection, detected for the 6th time.
What does E128 error mean on a Samsung AC035TNXDKG?
If your Samsung Air Conditioner displays error E128, it means Eva in sensor is detached.
What does E154 error mean on a Samsung AC035TNXDKG Air Conditioner?
If your Samsung Air Conditioner displays error E154, it indicates an indoor fan error.
What does E126 error mean on a Samsung AC035TNXDKG Air Conditioner?
If your Samsung Air Conditioner displays error E126, it indicates a discharge sensor error, specifically a short or open circuit.
What does E122 error mean on a Samsung AC035TNXDKG Air Conditioner?
If your Samsung Air Conditioner displays error E122, it indicates an error with the Eva-in sensor, specifically a short or open circuit.
General| Brand | Samsung |
|---|---|
| Model | AC035TNXDKG |
| Category | Air Conditioner |
| Language | English |
Defines WARNING, CAUTION, IMPORTANT, and NOTE symbols for safety messages.
Covers electrical safety, proper installation location, and avoiding hazards during installation.
Outlines safety rules for operating the air conditioner, including handling malfunctions and gas leaks.
Details safe procedures for cleaning the appliance, emphasizing power disconnection and avoiding hazardous chemicals.
Explains how to select and use different operating modes like Auto, Cool, Dry, Fan, and Heat.
Guides users on adjusting the temperature settings and fan speeds for optimal comfort.
Describes the Wind-Free cooling mode for a mild, draft-free cooling experience.
Addresses problems like the unit not working, temperature control issues, and airflow problems.
Solutions for remote control malfunctions, blinking indicators, and timed function errors.
To Next Page
