23
Installation Procedure
English
Steps Remote control display
14 Press the (Mode) button. Dry and Off appear on the remote control display.
15 Set the SEG18 and SEG20 values:
a Set the SEG18 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
SEG18
b Set the SEG20 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
SEG20
When you rotate the Wheel, values appear in the following order:
16 Press the (Mode) button. Fan and Off appear on the remote control display.
17 Set the SEG21 and SEG22 values:
a Set the SEG21 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
SEG21
b Set the SEG22 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
SEG22
When you rotate the Wheel, values appear in the following order:
18 Press the (Mode) button. Heat and Off appear on the remote control display.
19 Set the SEG23 and SEG24 values:
a Set the SEG23 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
SEG23
To Next Page
Loading...
