Samsung Electronics 3-9
No Parts Procedure Remark
1 Motor & Fan 1)Disassembl the connection wire to take the
motor fan out
2) Diassemble The Cabi Fan Bottom.
- Unscrew 9 screws
3) Disassemble the Link Screw
- Unscrew 3 screws
4)Disassemble 2 Case blower bottom.
- Unscrew 4 screws
5)Disassemble Bracket Motor and Motor.
- Unscrew 4 screws
6)After disassemble the Motor and Blower for
the set, disassemble the Blower by use of 3mm
wrench.
➤ service from Bottom side
To Next Page
Loading...
