3-12 Samsung Electronics
No Parts Procedure Remark
3 Evap 1)Disassemble The Case Evap Bottom
- [AC***JNHFKH]Unscrew 11 screws
- [AC***JNHPKH]Unscrew 7 screws
2)Disassemble The Drain Pan
3)Disassemble The Cover pipe.
- Unscrew 3 screws
4)Remove The cable tie on the Support Evap
5)Disassemble The Support Evap.
- Unscrew 2 screws
To Next Page
Loading...
