Disassembly and Reassembly
Samsung Electronics 23
No Parts Procedure Remark
1
ELECTRICAL
EQUIPMENT PARTS
1) Remove ** screws from the Cabinet.
(Use + Screw Driver)
2) Remove the 4 screws and then separate the
Cover Control Box part.
(Use + Screw Driver)
3) Remove the Power, Pump, 3way valve, Flow
sensor, Booster Heater, Back-up Heater, Sensor
connector of Assy PCB.
3-1 Tank Integrated Hydro Unit / Hydro Unit
■
AE200RNW
SS
G/AE260RNW
SS
G
Be sure that the power switch is in the OFF and the power source cord shall be unplugged prior to disassembly and reassembly works.
To Next Page
Loading...
