To Next PageTo Next PageWhat to do if water pump is on but flow S/W is off in Samsung Heat Pump?
If the water pump is on but the flow S/W is off, it indicates that the water flow is not sufficient. For models AE160JNYDEH and AE160JNYDGH, ensure the water flow is greater than 12LPM. For models AE090JNYDEH and AE090JNYDGH, ensure the water flow is greater than 7LPM.
What does Flow S/W ON error mean for Samsung Heat Pump?
If a Flow S/W ON error occurs with your Samsung Heat Pump, it means the flow S/W is ON in 10 minutes while the water pump signal is OFF.
What does Flow S/W OFF error mean for Samsung Heat Pump?
If a Flow S/W OFF error occurs with your Samsung Heat Pump: it can happen in 30 seconds if the flow S/W is OFF while the water pump signal is ON during starting, or it can happen in 15 seconds if the flow S/W is OFF while the water pump signal is ON after starting.
How to fix Samsung Heat Pump wired remote controller thermistor SHORT or OPEN?
To troubleshoot a wired remote controller thermistor SHORT or OPEN in your Samsung Heat Pump, check its resistance (10kohm@25 °C for the hydro unit, 200kohm@25 °C for the DHW Tank and Solar). Also, verify its location according to the diagram and its contact status with the pipe. If these steps don't resolve the issue, consider replacing the parts.
General| Brand | Samsung |
|---|---|
| Model | AE090JNYDEH |
| Category | Air Conditioner |
| Language | English |
Essential safety guidelines and warnings for operating the unit.
Explains the meaning of various icons displayed on the unit's screen.
Identifies and describes the functions of all buttons on the remote controller.
Details how to start and select basic operating modes like Heat, Cool, or Auto.
Explains how to operate the unit in DHW mode for hot water supply.
Describes the Outing mode for maintaining low-temperature heating when away.
Explains how to activate Silent mode to reduce operational noise.
Guides on how to check various system temperatures using the View button.
Explains how to view the currently set operating temperature.
Details Time Division Switching specifications for simultaneous A2A/A2W operation.
Instructions for setting up scheduled operations using the weekly timer.
Explains how to apply holiday settings to override weekly timers.
Guides on how to cancel specific weekly timer settings.
Details how to reset all weekly timer settings to their defaults.
Instructions for setting daily operational schedules for the unit.
Guides on accessing and configuring advanced settings in User Setting Mode.
Covers the initialization of communication for the wired remote controller.
Explains how to enter and utilize the installation/service modes of the controller.
Details the process for setting field specifications via the wired remote controller.
Guides on how to check field specifications using the wired remote controller.
Provides an overview of Field Setting Values (FSV) for system customization.
Outlines essential maintenance activities and operational precautions.
Explains error codes and communication issues for troubleshooting.
Lists the technical specifications for the indoor units, including weight and dimensions.
