What to do if my Samsung Heat Pump shows E911 error?
If your Samsung Heat Pump displays error E911 indicating that the water pump is ON but the flow switch is off, ensure that the water flow is greater than 16 LPM for model NH160PHXEA or greater than 12 LPM for model NH080PHXEA.
How to fix FRAM Read/Write Error on Samsung AEN160YDEHA?
If you encounter a FRAM Read/Write Error (wired remote controller data error) with your Samsung Heat Pump, the suggested solution is to replace the affected parts.
What to do if Samsung AEN160YDEHA wired remote controller thermistor is short or open?
If you are experiencing a wired remote controller thermistor short or open issue with your Samsung Heat Pump, the final solution is to change the parts.
What to do if EVA Inlet thermistor is short or open on Samsung AEN160YDEHA?
If the EVA Inlet thermistor on your Samsung Heat Pump is SHORT or OPEN, the final solution is to change the parts.
What to do if EVA Outlet thermistor is short or open on Samsung Heat Pump?
If the EVA Outlet thermistor on your Samsung Heat Pump is SHORT or OPEN, the final solution is to change the parts.
What to do if Water Inlet thermistor is short or open on Samsung AEN160YDEHA Heat Pump?
If the Water Inlet thermistor on your Samsung Heat Pump is SHORT or OPEN, the final solution is to change the parts.
What to do if PHE Outlet thermistor is short or open on Samsung AEN160YDEHA Heat Pump?
If the PHE Outlet thermistor on your Samsung Heat Pump is SHORT or OPEN, the final solution is to change the parts.
What to do if Water Outlet thermistor is short or open on Samsung Heat Pump?
If the Water Outlet thermistor on your Samsung Heat Pump is SHORT or OPEN, the final solution is to change the parts.
What to do if Water TANK thermistor is short or open on Samsung AEN160YDEHA?
If the Water TANK thermistor on your Samsung Heat Pump is SHORT or OPEN, the final solution is to change the parts.
General| Model Number | AEN160YDEHA |
|---|---|
| Cooling Capacity | 16.0 kW |
| Heating Capacity | 18.0 kW |
| Power Supply | 380-415V, 3Ph, 50Hz |
| Refrigerant | R410A |
| Type | Heat Pump |
To Next Page