33
Caution for installing discharge duct
Static pressure of the discharge duct should be within the standard specication (78.45 Pa) when
installing the duct.
If you remove the fan guard to install the discharge duct, make sure to install a safety net on the duct
outlet. Foreign substance may enter into the product and there could be a risk of personal injury.
Wear protection equipment at all times when making galvanized sheet metal duct, since the worker may
get injured by the sharp parts.
When installing the outdoor unit under the tree or near forest, leafs may get into the product and cause
problems on the product. Therefore, install a discharge duct to prevent foreign substance inltration.
<Protecting discharge duct>
<Preventing foreig
n substance inltration>
CAUTION
DVM S HE_IM_DB68-05461A-08_EN.indd 33 2017-03-24 오후 1:38:19
To Next Page
Loading...
