57
Examples of refrigerant pipe installation
H/P
1. Using Y-joint
2. Using distribution header
H/R
1. Using Y-joint
MCU
MCU
MCU
MCU
MCU
MCU
Note 1)
Note 1) Direct-connected indoor unit without MCU (for HR only)
- This indoor unit can only be used for cooling operation. (Heating operation is not possible.)
- Connect indoor unit to liquid and low pressure gas pipe.
- Change the installation option for direct-connected indoor unit without MCU. (refer to the indoor unit
installation manual)
DVM S HE_IM_DB68-05461A-08_EN.indd 57 2017-03-24 오후 1:38:28
To Next Page
Loading...
