Indoor unit
f Where airow is not blocked.
f Where cool air can be distributed throughout the room.
f Install the refrigerant piping length and the height dierence of both indoor and outdoor units as indicated in the
installation diagram.
f Wall that prevents vibration and is strong enough to hold the product weight.
f Out of the direct sunlight .
f 3.28ft (1m) or more away from the TV or radio (to prevent the screen from being distorted or noise from being
generated).
f As far away as possible from the uorescent and incandescent lights (so that the remote controller can be operated well).
f A place where the air lter can be replaced easily.
f Don't install directly above electronics equipment as leaking water may cause damage if not serviced. (eg. Computers, TV, etc).
4.92 inch
(125 mm)
or more
3.94 inch (100 mm) or more
4.92 inch
(125 mm)
or more
Wrap the refrigerant pipes and the drain hose
with the absorbent pad and vinyl tape. Refer to
page 13~14 for further details.
You can select the direction of
draining (left or right).
K
The appearance of the unit may be dierent from the diagram depending on the model.
Choosing the installation location
English-6
To Next Page
Loading...
