18
Installation Procedure
English
Installation Procedure
࡛ To protect the product from water and possible shock,
you should keep the power and the communication
cables of the indoor and outdoor units in the iron pipe.
࡛ Connect the power cable to the auxiliary circuit
breaker (ELCB, MCCB, ELB).
࡛ Keep distances of 50mm or more between power cable
and communication cables.
࡛ Power supply cords of parts of appliances for outdoor
use shall not be lighter than polychloroprene sheathed
˙ʪуɵʪʀͱθʒ࣑Aͱʒʪʒʪϑ˝ɇϩͱÃkAࡤߨߢߤߦߧÃkAߧߩࢩ
AkĘkøkAࡤ²ߢߧŵĘࣛͱθÃkAࡤߨߢߤߦߧÃkAߨߨࢩAkĘkøkAࡤ
H07RN-F)
࡛ Screws on terminal block must not be unscrewed with
ϩ˵ʪϩͱθαЇʪʪϑϑϩ˵ɇߣߤ˝˙࡛ʀ
࡛ When installing the indoor unit in a computer room,
Їϑʪϩ˵ʪʒͱЇɵʪϑ˵ʪʒʪʒ࣑ϩɇΧʪɇЇЇࢩΧͱцʪϑϩʪθ
braid + copper) cable of FROHH2R type.
220~240V~
Outdoor Unit
ELB
MCCB
Indoor Unit 1 Indoor Unit 2 Indoor Unit 3
Indoor Unit 4
Indoor Unit 5 Indoor Unit 6
࢜ ELB : Essential Installation
࢜ Ceiling, wall-mounted indoor unit.
EEV kit
Wired Remote
Control
Selecting the crimping terminal lug
1 Select the crimping terminal lug based on the norminal dimension of the power cable.
2 Cover the connection part of the power cable and crimping terminal lug to insulate it.
Silver solder
FE
L
D
d1
B
d2
t
B
2
R
To Next Page
Loading...
