Samsung AM NN1PEH Series - Page 46

46
English
Installation Procedure
Installation Procedure
Additional information on SEG 3, 4, 5, 6, 8, 9
When SEG 3 is set to 1 and the HR-specific auto changeover function is run, the indoor unit operates as shown in the
following figure:
C
Temperature
b
d
c
A
D
B
a
Ts
Set temperature
for Auto mode
Reference
temperature for
cooling
Reference temperature for heating
Reference temperature for change from
heating to cooling
Reference temperature for
cooling
Cooling thermo off Cooling thermo on Heating thermo off Heating thermo on
ࡤƊʪϩиϩ˵Ɗkߦ࣑ઘA࣒
9ࡤƊʪϩиϩ˵Ɗkߧ࣑ઘA࣒
AࡤƊʪϩиϩ˵Ɗkߨ࣑ઘA࣒
UࡤƊʪϩиϩ˵Ɗkߪ࣑ઘA࣒
The mode change between the Cool and Heat modes is made only when the thermo off state is maintained for the
period of time set with SEG9.