What does it mean if my Samsung AM has an error on the EVA IN sensor of the indoor unit?
An error on the EVA IN sensor of the indoor unit of your Samsung Air Conditioner indicates a short or open circuit.
What does it mean if my Samsung AM has an error on the EVA OUT sensor of the indoor unit?
An error on the EVA OUT sensor of the indoor unit of your Samsung Air Conditioner indicates a short or open circuit.
What does it mean if my Samsung AM has an error on the thermal fuse of the indoor unit?
An error on the thermal fuse of the indoor unit of your Samsung Air Conditioner indicates an open circuit.
Why is the heating operation restricted at outdoor temperature over Theat_high value on my Samsung AM?
The heating operation on your Samsung Air Conditioner is restricted when the outdoor temperature exceeds the Theat_high value, which is set to a default of 30 °C.
Why is the cooling operation restricted at outdoor temperature below Tcool_low value on my Samsung AM?
The cooling operation on your Samsung Air Conditioner is restricted when the outdoor temperature falls below the Tcool_low value, which defaults to 0 °C.
What to do if the indicators of the digital display flashes on Samsung AM Air Conditioner?
If the indicators on the digital display of your Samsung Air Conditioner are flashing, press the Power button on the remote control to turn the unit off, then switch the circuit breaker off. After a moment, switch the breaker back on.
General| Brand | Samsung |
|---|---|
| Model | AM Series |
| Category | Air Conditioner |
| Language | English |
Safety instructions and warnings specific to the installation process.
Safety guidelines and warnings related to the appliance's power supply.
Safety precautions and guidelines for operating the air conditioner.
Safety advice and precautions for cleaning the air conditioner.
Identification and description of the primary components of the indoor unit.
Specifies the recommended operating temperature and humidity ranges for the unit.
Instructions for pairing multiple indoor units with a single remote control.
Steps and precautions for cleaning the exterior surfaces of the indoor unit.
Instructions for cleaning the heat exchanger of the outdoor unit.
Detailed steps on how to detach and clean the air filter.
Procedures to reset the filter cleaning reminder after cleaning.
Schedule and requirements for regular maintenance of the unit.
Common problems and their solutions for the air conditioner.
Guide for selecting the location and mounting the indoor unit.
Procedure for testing the system for refrigerant gas leaks.
Instructions on how to properly insulate refrigerant piping and hoses.
Guidelines for connecting power and communication cables between units.
Guide for selecting and insulating crimping terminal lugs for power cables.
Details on terminal block dimensions and power specifications.
Table of rated currents for different indoor unit models.
Comprehensive guide for setting indoor unit addresses and installation options.
General procedure for entering the setting mode and selecting options.
Instructions for setting the addresses for indoor units and MCU.
To Next Page
