31
ENGLISH
Insulating Base Heater
Install the Base Heater on the
bottom part of the outdoor unit
after drilling and fix 3 places with
the fixing clips and fixing screws.
To prevent the Base heater wire
from interfering with the fan during
operation, fix it to the motor bracket
wire.
Fix the enclosed PBA on the control
box as shown in the figure.
Use enclosed screw to fix 1 place on
the PBA.
Connect the Base heater connector
(white) as shown in the figure.
Connect the PBA connector (blue)
as shown in the figure.
ki]_TW__]_hTWXptk}tGzGljvG䖐㨴㥐㛨ὤhhluUGGGZX YWYWTWZTY^GGG㝘䟸GYaX[aZ[
To Next Page
Loading...
