Disassembly and Reassembly
Samsung Electronics 103
No Parts Procedure Remark
4) Separate the Heat Exchanger from the indoor
unit.
5) Separate the EXPANSION COIL from the EEV
BODY.
(When servicing the EEV)
5
DRAIN PUMP
1) Remove the 3 screws fixed in COVER FAN
MOTOR. (Use +Screw Driver)
2) Remove the screw fixed in HOLDER FAN.
(Use +Screw Driver)
If the reassembly, end surface of HOLDER
FAN and surface of ASSY CROSS FAN_L
should be consistent.
To Next Page
Loading...
