3-88 Samsung Electronics
No Parts Procedure Remark
4
ASS’Y OUTLET
PART
1) Remove the 2 screws which is fixed to
ASS’Y-PANEL DISPLAY. (Use +Screw Driver)
Please be careful you do not scratch the
blade during unscrewing.
2) Separate the CONNECTOR-WIRE of ASS’Y-
PANEL PCB.
3) Remove the 2 screws from the ASS’Y-
OUTLET SHUTTER and remove the 2
screws from the front of COVER TOP.
(Use +Screw Driver)
And then separate by pushing it upwards.
Direction of
disassembly
To Next Page
Loading...
