Samsung Electronics 3-89
No Parts Procedure Remark
5
ASS’Y EVAP PART
1) Remove the 9 screws which is fixed to
PARTITION. (Use +Screw Driver)
2) Remove the 2 screws which is fixed to
COVER EVAP COLLECTOR and then sepa-
rate the ASS'Y EVAP. (Use +Screw Driver)
Be careful not to crush the FIN during
ASS’Y EVAP disassembly and avoid the
sharp edge of the FIN.
3) Remove the 4 screws which is fixed to
ASS’Y-PANEL DRAIN.
To Next Page
Loading...
