Samsung AM012KNQDCH/AZ - Page 150

3-90 Samsung Electronics
No Parts Procedure Remark
6
ASS’Y MOTOR
PAR T
1) Remove the BLOWER NUT and separate
the BLOWER. (Use Monkey Spanner)
2) Remove the 3 fixing nut of the MOTOR and
remove the ground wire fixing screw.
(Use Monkey Spanner)
7
ASS’Y CONTROL IN
PAR T
1) Remove the 2 screws which is fixed to
COVER CONTROL. (Use +Screw Driver)
2) Remove the 2 screws which is fixed to
ASS’Y CONTROL IN. (Use +Screw Driver)
Direction of
disassembly