No Parts
Procedure Remark
1 Panel
1)
Pull both hooks and take the grille downward.
Two safety clips are mounted to the front grille
to prevent it from dropping.
2) Detach the safity clip and take up the grille.
3) Remove the 2 fixed screws to remove the
Control-Box Cover. (Use +Screw Driver)
4)
Remove the Remocon-Receiver and Blade
Connector Wire from the PBA. (3EA)
■ AM015/022/028/036/045/056/060NNNDEH/**
AM005/007/009/012/018/020NNNDCH/**
To Next Page
Loading...
