Disassembly and Reassembly
Samsung Electronics 201
ŶWall Mounted type (Boracay)
No Parts Procedure Remark
1 Front Grille
1) Stop the air conditioner operation and shut
off the main power.
2) Open the FRONT-GRILLE and pull out from
the PANEL-FRONT.
3)
Detach COVER-TERMINAL from the PANEL-
FRONT. (Use +Screw Driver.)
4) Loosen connector wire (white) and detach
the temperature sensor wire.
5) To detach the FRONT-PANEL the main
frame unfasten 2 screw at the gutton. (Use
+Screw Driver.)
6) Take off the FRONT-PANEL, lifting up the
button.
– All the procedure has to be verified because the cover should not open when the unit is installed.
To Next Page
Loading...