Samsung AM018KNQDCH/TC - Oap Duct

Disassembly and Reassembly
238 Samsung Electronics
No Parts Procedure Remark
1 MOTOR
&
BLOWER
1) Open the CONTROL BOX and detach EEV
WIRE, SENSOR WIRES and BYPASS WIRE.
(Use + Screw Diriver)
2) Unscrew 2 fixing screws of the Case
Control screw, Unscrew 6 fixing screws
of the Cover and detach.
(Use+Ssrew Driver)
3) Unscrew 28 screws and detach CABINET TOP.
(Use + Screw Diriver)
4) Unscrew 29 screws and detach
CABINET SIDE RH and LF.
(Use + Screw Diriver)
5) Unscrew 10 screws and detach
BLOWER COVER . (Use + Screw Diriver)
Detach the BLOWER .
(Use the wrench(4mm))
ŶOAP DUCT
- AM140JNEPEH/EU