Disassembly and Reassembly
Samsung Electronics 203
No Parts Procedure Remark
3)
Disconnect the Connector Wire that is
connected to the indoor unit's PBA from
the PBA.
4)
Unfasten the 2 screw.
(use + Screw Driver)
5)
Take off the CASE-CONTROL from the
main frame.
3 EVAPORATOR
1)
Unfasten the screw at the right side.
(use+ Screw Driver)
2)
Unfasten the screw at the LEFT side.
(use+ Screw Driver)
To Next Page
Loading...