Disassembly and Reassembly
Samsung Electronics 273
No Parts Procedure Remark
4 EVAPORATOR 1) Remove the 4 fixing screws of the Cover
Pipe at the Heat Exchanger’s In/Out Pipe.
(Use +Screw Driver)
2) Remove the screws of the Steel Holder
Evaps that are used to fix the Heat
Exchanger, and then remove it.
(Use +Screw Driver)
5 DRAIN PUMP 1) Remove the 4 fixed screws and disconnect
the white drainage hose from the Drain
Pump. (Use +Screw Driver)
To Next Page
Loading...