Disassembly and Reassembly
3-66 Samsung Electronics
No Parts Procedure Remark
6) Disassemble the bolts that are assembled
with the indoor unit at the 4 panel corners.
7) Press the Hangers at both sides of the
panel inwards, to remove it from the
indoor unit’s hook.
Remove the panel from the indoor unit.
2
Control-Box
1) Disconnect the Connector Wire that is con-
nected to the indoor unit’s PBA
2) Unscrew the 2 fixed screws on both sides
of the Control Box, and disassemble the
Control Box from the indoor unit.
(Use +Screw Driver)
To Next Page
Loading...
