Disassembly and Reassembly
150 Samsung Electronics
No Parts Procedure Remark
2
DRAIN PAN
1) Press the left and right side HOOK of PANEL
and then separate the PANEL from the indoor
unit.
2) Remove the 6 screws fixed in DRAIN PAN. (Use
+Screw Driver)
3) Remove the 2 HOOK fixed in DRAIN PAN and
then separate from the indoor unit.
When disassembling the PAN, be careful
not to touch the heat exchanger board with
a bare hand.
3
SPI-KIT
(Option)
(Continues)
1) Remove the SPI KIT from the indoor unit, as
shown in the picture.
To Next Page
Loading...