Disassembly and Reassembly
222 Samsung Electronics
No Parts Procedure Remark
4
Evap
※
Work is possible when Disassembling
the Ass'y Cabi Bottom Blower.
1) Disassemble 6 indicating screws and detach
Ass'y Cabi Bottom Drain.
(Use +Screw Driver.)
2)
Disassemble Sensor on the Evap.
3)
Disassemble 2 indicating screws which are in
the near of Hanger Plate to detach the Evap.
(1 screw each at left and right side)
It needs 2 peoples.
To Next Page
Loading...