Disassembly and Reassembly
Samsung Electronics 225
No Parts Procedure Remark
3 Motor & Fan
(Continues)
1) Disassembl the connection wire,the take the
Motor Fan out.
2) Disassemble the 2 Holder Motor.
- Unscrew 2 screws.
3) After disassembling the Motor and Blower
for the set, disassemble the Blower by use
of 3mm wrench.
4) Disassemble the 3 Case Blower Top.
- Unscrew 6 screws
To Next Page
Loading...