Samsung AM056FN2DEH Series - Page 245

Disassembly and Reassembly
Samsung Electronics 245
No Parts Procedure Remark
3 Blowing
&
Evap Part
3)
Release 2 screws and pull Bottom Discharge
Kit( ⓖ ) out.
4)
Disconect the Step Motor wire( ⓗ ) from
the conect wire . This part is right side of the
Bottom Discharge Kit( ⓖ ).
5)
Pull Bottom Discharge Kit( ⓖ ) Out from the
bottom of it.
6)
Release 3 screws and pull the Evap out from
top to bottom direction.
ⓖ
ⓗ
ⓖ
