Disassembly and Reassembly
Samsung Electronics 287
No Parts Procedure Remark
1
CABINET
(Continues)
9)
Loosen the CONDUIT from ASSY CONTROL
COOLER IN lower part and then separate the
TEMP SENSOR.
10)
Remove the 2 screws from front and rear
parts. Remove the 2 screws from side part
and then separate the ASSY CABI LF in the
direction of the side.
11)
Replace of REACTOR and FAN is available
after remove the ASSY CABI LF.
To Next Page
Loading...