Disassembly and Reassembly
292 Samsung Electronics
No Parts Procedure Remark
1 CABINET
(Continues)
5) Remove the 2 screws and open the HINGE
PBA PLATE.
6)
Pull the SLIDE PBA and then separate the
WIRE CONNECTOR.
7)
Pull the wire connectors of reactor and remove
the 2 screws to pull a bracket of reactor.
- AM160/250TNBFEB : 4 Wire connectors of
reactor
- AM160/250TNBFGB : 2 Wire connectors of
reactor
To Next Page
Loading...